86-133-06667709 •

6 Ton Hydraulic Puller Stringing Equipment With Italian Reducer

6 Ton Hydraulic Puller Stringing Equipment with Italian Reducer Admin Edit

45000.0 USD
Min. Order: 1 Set/Sets
Trade Term: FOB,CFR,CIF
Payment Terms: L/C, T/T
Place of Origin: Zhejiang, China (Mainland)
Means of Transport: Ocean, Land
Production Capacity: 10 sets per month
Packing: container plywood case Delivery Date: 30-45 days
Brand Name: Dongfang Cable Winch Puller: 6 Ton Hydraulic Puller Stringing Equipment
Max. pulling force: 6 Ton 60 KN Max. pulling speed: 5 km per hour
Suitable: for single or two conductors Diameter of pulling rope: 18 mm diameter
Cummins Engine Power: 77 KW Dimension: 3.8 X 2.1 X 2.3 M
Weight: 3000 KG

6 Ton Hydraulic Winch Puller is used for overhead transmission line single or two conductorsstringing. The machine is equipped with Water Cooled Cummins Engine and Rexroth Hydraulic Pump with closed hydraulic control system.

 

We are the first one in stringing equpment manufacture in China to get CE certificate.

1. SA-YQ60 Hydraulic Cable Puller

Item No.

07031

Model

SA-YQ60

Stringing capacity

1 PILOT WIRE ROPE

Max. Pulling Force (KN)

60

Continuous Max. Pulling Force (KN)

50

Speed at Max. continuous pull:

2.5km/h

Max. Pulling Speed (m/min)

5km/h

Root Diameter of Bull wheel (mm)

Φ460

Number of grooves

7

Max. Steel rope Diameter (mm)

Φ18

Model of Diesel Engine

Water cooled diesel engine

Power of Diesel Engine

77 KW

Rotate Speed of Engine (rpm)

2800

Electrical System

DC24V

Weight (kg)

3000

Dimension (m)

3.8 x 2.1 x 2.3

Application: The hydraulic puller is used to pull pilot wire rope for overhead transmission line Stringing.  It is equipped with diesel engine and closed hydraulic system, it can be easily used and maintained

Features:

-With closed hydraulic circuit and variable displacement plunger pump, the pulling force could be step less controlled, and can be read on the line pull gauge.

-The max pulling force for stringing operation can be preset.

-Automatic over pulling protection system

-With the radiator imported from Germany, the machine has good heat dissipate performance.

-With a negative spring applied hydraulic released brake, and automatic overload protection.

-With hydraulic oil cooling system.

-Heat treated wear-proof steel bull wheels

-With rigid axle for towing at high speed, the machine looks beautiful.

-Integral self-loading reel winder with automatic level wind.

-Heavy duty R-tires with excellent shock-absorbing performance.

 

Main Components:

-Engine: Cummins water-cooled diesel engine (China)

-Main variable displacement hydraulic pump and main motor: Rexroth (Germany)

-Reducer: R.R. (Italian)

- Main hydraulic valve: Rexroth (BOSCH)

-Hydraulic instruments: WIKA (German)

-Radiator: AKG (German)

- The hydraulic reel winder is equipped with 1400mm diameter steel drum (GSP1400)

 

The 6 Ton puller can be used in mountain area to pull single or two conductors.


We have designed and produced whole series of hydraulic winch puller for overhead transmission line stringing up to 1000 KV in China.

Our Series of Hydraulic Winch Puller

Model

Max. Pulling Force

Usage

Max. Diameter of rope

SA-YQ30

30 KN

Single conductor or OPGW

13 mm

SA-YQ40

40 KN

Single conductor or OPGW

16 mm

SA-YQ60

60 KN

Single or Two Conductors

18 mm

SA-YQ90

90 KN

Two or Three Conductors

20 mm

SA-YQ180

180 KN

Three or Four Conductors

24 mm

SA-YQ220

220 KN

Four or Six conductors

30 mm

SA-YQ250

250 KN

Four or Six conductors

32 mm

SA-YQ300

300 KN

Four or Six conductors

38 mm

SA-YQ400

420 KN

Four or Six conductors

45 mm

 


5-6. SINGLE CONDUCTOR PULLEYS

Item No.

Model

Working Load (KN)

Conductor Range (mm)

Material of sheave

Weight (kg)

10104

SHDN508

20

≤25 mm

Nylon

16

10124

SHDN660

20

≤30 mm

Nylon

30

Application: The single nylon sheave stringing block is used for OPGW or single conductor stringing. The sheaves are all made of high strength MC nylon. All the sheaves are mounted on high strength heavy duty ball bearings. The frame of rollers is made of galvanized steel.

Stringing Swivel Joints

Item No.

Model

Dimension of Connector (mm)

Working Load (KN)

Weight (kg)

A

B

C

D

E

17124

SLX-3

37

129

95

16

16

30

0.65

17125

SLX-5

42

154

116

18

17

50

1.5

17126

SLX-8

57

220

165

24

22

80

2.4

Application: It is used to pull conductors. Constructed with ball bearings inside, to eliminate the torque force which stringing conductors. The product can not be used for connection of pilot ropes, because it can not pass through the bull wheels of puller.

7. Anti twisting braided steel wire rope

Item No.

Nominal diameter

Min. Breaking Load (KN)

Single strand diameter (mm)

Normal T/S (N/mm²)

Net Weight (kg/1000m)

18208A

16

160.00

Φ3.5

1960

800

Anti twisting steel rope is specially braided from  high strength, high flexible galvanized steel wire. The braided steel strand has high flexibility, complete stability to rotation under tension force. The wire rope is lubricated for long time usage.

It can homogeneously distribute the pressure between the elementary wires. The special rope can increase efficiency during the overhead transmission line stringing work. The rope is packed in steel drum which can be installed directly on the reel winder of puller.

5.1 Tension stringing method

 

The tension stringing method is applicable for both transmission and distribution lines, and  shall be considered the state of the art of the conductor installation methods.

 

This method is illustrated in Figures 6a to 6d for distribution lines and Figures 6e to 6m for transmission lines.

 

Using this method, the conductor is kept under tension during the stringing process to  keep  the conductor from contacting the Earth surface or other obstacles between towers since this will cause conductor surface damage. The tension in the conductor also allows it to pass over energized circuits, railway or major road crossings, etc. without contacting them.

 

For multiconductor per phase lines, the tension stringing method requires the installation of a light synthetic or metallic pilot rope into the stringing blocks. This is normally done using the slack stringing stationary reel method by either a towing vehicle or a  helicopter  or  a  drone. The pilot rope is used to pull in a heavier pulling rope, and the pulling rope is then used to pull  in the conductors.

 

For single conductor per phase installations, the pulling rope may be installed directly with a towing vehicle or by helicopter eliminating the use of a pilot rope completely.

 

All the subconductors of each bundle are strung at the same time and with the same tension applied, to avoid difference sag behaviour once installed.


 

The first and most common method for tension stringing conductors is to use one or more tensioners, depending on the number of subconductors in a bundle, and one puller. This methodology can be named as "1 by n", where 1 means one pulling rope and n means the number of subconductors of the bundle (see Figure 6i).

 

In case of a large  number of subconductors in a bundle, another  possible stringing methodology is to provide a pulling rope for each conductor, by using one or more tensioners and one or more pullers. This methodology can be named as "n by n", where the first n means the number of pulling ropes and the second n means number of subconductors in the bundle (see Figure 6j).

 

Where a transmission line is to be reconductored, often the old conductor is used as a pulling rope to pull in the new conductor, and the puller machine becomes  a  puller-tensioner  machine. This methodology is equivalent to the previous "n by n" method, where the first n means the number of old subconductors used as a pulling rope and the second n means the number of subconductors in the bundle (see Figure 6k).

 

An alternative method for reconductoring operations, when the mechanical strength of the old conductor is not well predictable, is to use a pulling rope as a tensioning element while recovering the old conductor, in order to keep them suspended from the ground and  to minimize the tension value in the old conductor. Then the installed rope can be used as a pilot or pulling rope for the new conductor installation. This methodology can be named as "n by 1" method, where n means the number of old subconductors to be recovered and 1 means one tensioning rope to be used to keep tension in the old conductor bundle.


 

. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service


PRODUCT DETAIL Hydraulic Cable Puller for Overhead Transmission Line Stringing

Hydraulic Cable Puller for Overhead Transmission Line Stringing

SA-YQ40 SA-YQ60 SA-YQ90D SA-YQ180
PRODUCT DETAIL Cabrestante Y Maquinas para Tendido de Cables

Cabrestante Y Maquinas para Tendido de Cables

SA-YQ300
PRODUCT DETAIL 40 Ton Hydraulic Winch Puller for Overhead Conductor Stringing

40 Ton Hydraulic Winch Puller for Overhead Conductor Stringing

SA-YQ420
PRODUCT DETAIL 30 Ton Conductor Winch Puller with American Cummins Engine

30 Ton Conductor Winch Puller with American Cummins Engine

SA-YQ300
PRODUCT DETAIL 25 Ton Stringing Winch Puller for Overhead Conductors Pullling

25 Ton Stringing Winch Puller for Overhead Conductors Pullling

SA-YQ250
PRODUCT DETAIL 22 Ton Hydraulic Winch Puller for 6 bundled conductor stringing

22 Ton Hydraulic Winch Puller for 6 bundled conductor stringing

SA-YQ220, SA-YQ250
PRODUCT DETAIL 18 Ton Overhead Transmission Line Conductor Puller with Germany Rexroth Pump

18 Ton Overhead Transmission Line Conductor Puller with Germany Rexroth Pump

SA-YQ180 SA-YQ180G
PRODUCT DETAIL 9 Ton Conductor Winch Pulling Machine for 18MM Anti Twist Rope

9 Ton Conductor Winch Pulling Machine for 18MM Anti Twist Rope

SA-YQ90 SA-YQ90D

Category: Hydraulic Puller Stringing Equipment