1. DQ40 Cable Puller
Item No.: 21135
- Maximum Continuous pulling force (KN): 40
- Pulling speed (m/min): 0-12
- Steel wire rope size (mm): Φ11
- Rope winding capacity (m): 650
- Water cooled Diesel engine: 24 hp /2000 rpm
- Equipped with Water cooled diesel engine system
- Equipped with hydraulic pump and motor, hydraulic steppless speed control system
- with max. pulling force preset, pulling force could be displayed on the machine. With over-load protect system, the machine will be stopped if the pulling cable get stuck in duct.
- The speed could be displayed digitally, the pull length could be displayed on board.
- With automatic winding system, the winding force could be adjusted.
- With rigid axle for towing
Application: It is used to pull cable in underground cable installation operation.
Dimension (mm): 3670x1800x1500
Weight (kg): 2000
2. Cable roller for laying underground cable
Working load (KN)
Construction of Cable Roller
Steel Plate Base Nylon Roller
Steel frame Nylon Roller
Application: It is used for laying underground cable.
Note: For cable up to diameter Ø150mm.
3. Cable Corner Rollers
Frames of corner rollers can be linked together with stake pins to form a suitable bend to guide cables around the corner.
Working load (KN)
Size of Cables (mm)
4. SHC1000 Guide Rollers
Item No.: 21291
Overall Length (mm): 1000
Weight (kg): 27.3
Note: Could be fold in V type.
5. Swivel Joints
Application: It is used to pull conductors. Constructed with ball bearings inside, to eliminate the torque force which stringing conductors.
Dimension of Connector (mm)
Working Load (KN)
6-8. Cable net Grips
Cable Diameter (mm)
Rated Load (KN)
Application: Cable pulling grips are used for pulling underground or overhead cables for power, communication or optic fiber cable installations.
9-10. Cable Drum Trailer
Specification of Reel
Shaft Dia. (mm)
Application: It is used for transportation and lifting the cable drum. The equipment is equipped with rigid axle for towing on site, the trailer has hydraulic jack for load and unload the reel.
The 21153 can be dismantled for easy transportation.
Maquinas para tendido de cables subterraneos:
1. The machine will be shipped in container
2. We will ship the products within one month normally after receiving the payment.
3. Stock is available for standard product.
1. The machine will be loaded in container and fixed with steel wire rope.
2. The accessory and operation manual will be packed in plywood case.
1. We accept T/T and L/C.
2. Please send swift copy of T/T if you arrange payment by T/T
3. Please send us the L/C draft to us before issue L/C.
Why choose us:
1. High quality and competitive price, more than 30 engineers working in the design and quality control department.
2. Leading and biggest manufacture for stringing equipment in China.
3. 25 years of production experience and more than 1000 customers in the country and abroad market. The set of 9 ton puller and 8 ton tensioner have been sold to more than 20 countries.
4. Big stock condition for fast shipment.
5. Detailed pre-sales service and fast active after-sales service. Response within 12 hours after-sales service